2024 John Deere 1 Series 1023E
- Year 2024
- Make John Deere
- Model 1 Series
- Engine Model: 3TNM74F-NCJT
2024 John Deere 1 Series 1023E
- Powerful Final Tier 4-compliant diesel engine
- New, easy-lift hood with dual gas-charged lift struts
- AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes
- Easy-to-operate two speed hydrostatic transmission
Features may include:
Spend more time working and less time switching equipment with easy implement swaps1 Family Tractors are designed to minimize the time and effort needed to switch-out implements to accommodate different jobs.
- AutoConnect Deck System: Connect a mid-mount mower deck to the tractor in less than 60 seconds without leaving the seat except to lock the gauge wheels.
- Load-N-Go attachment: Easily move your 54D or 60D AutoConnect Deck with your John Deere Loader after it has been disconnected from the tractor with the Load-N-Go ramps.
- Quik-Park™ Loader System: 120R Quik-Park™ Loaders are designed for easy mounting and removal in about a minute, with no tools needed.
- Quik-Tatch™ front hitch: Save time switching front implements like a snow blower, rotary broom, or front blade without tools.
- iMatch™ quick-hitch: Easily hookup Category 1 implements in seconds using three fixed points to back in and pick up rear implements without leaving the seat
- Position control hitch: Set the rear hitch height and then consistently lower the hitch to the exact height every time, which is especially useful in grading and leveling applications.
- Quik-Knect™ system: Connect power take-off (PTO)-driven implements quickly and with low physical effort. The Quik-Knect system utilizes one connector for the tractor’s PTO shaft and a designated connector for each implement which eliminates twisting and forcing splines to align.
1 Family Tractors can have up to three implements mounted simultaneously due to standard dual selective control valves (SCVs), allowing you to switch from using one implement to another without stopping to adjust. When a third SCV kit is added, the number of possible combinations is greatly increased.
Quickly and easily change speed and directions with Twin Touch foot controls and Hydrostatic transmission (HST)The hydrostatic transmission’s infinite ground speeds and direction of travel are both controlled with the Twin Touch foot pedals.
- Ideal for loader or mower applications where frequent direction and speed changes are needed
- No clutching for fast direction changes
- Match the job at hand with infinite ground speeds
Both 4WD and power steering are standard equipment on the 1 Family Tractors. This combination allows for excellent maneuverability and ease of operation.
- Narrow overall width allows you to work in tight areas where most compact tractors just cannot fit. The 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all types of terrain.
- Power steering means fewer turns of the steering wheel than manual steering, which is especially valuable when mowing around obstacles or during front loader work.
- High horsepower-to-weight ratio makes the 1 Family Tractors a good choice for a variety of tasks. The overall tractor weight reduces ground compaction and makes them excellent for mowing.
- The fully-independent power take-off (PTO) allows engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.
Engine
Engine Power
SAE J1995 rated power: 21.5 hp (16 kW) / 3200 rpm at 21.8 PS
Engine Manufacturer
Yanmar®
Engine
Model: 3TNM74F-NCJT
Rated Engine Speed
3200 rpm
Aspiration
Natural
Emissions
Compliance: Final Tier 4
Displacement
60.6 cu in. (0.993 L)
Cylinder Liners
Three cylinders | Cast-in-block
Bore
2.91 in (74 mm)
Stroke
3.03 in. (77 mm)
Lubrication
Pressurized
Cooling System
Water pump
Air Cleaner
Dual element
Engine Torque
At rated speed: 35.2 lb-ft (47.7 Nm)
PTO
PTO Power, Rated Engine Speed
Power take-off (PTO) power: 14.9 hp (11.1 kW) | Rear: 540 rpm / Mid: 2100 rpm
PTO Type
Control: Independent
Fuel System
Fuel Type
Diesel
Compression Ratio
23.5:1
Fuel System
Indirect injection
Drivetrain
Injection Pump Type
Indirect injection
Transmission
Hydrostatic - two range
Final Drive
Spur gear
Steering
Power
Clutch
Wet disk
Brakes
Brake System Type
Wet disc (left-hand pedal)
Wheels & Tires
Tires, Front Specification
R3 Turf: 18x8.50-10 / R4: 18x8.5-10
Tires, Rear Specification
R3 Turf: 26x12-12 / R4: 26x12-12
Battery
Battery
500 CCA
Electric
Alternator
40 amp
Electrical
Starter size: 1.6 hp (1.2 kW)
Hydraulics
Hydraulic Type
Open center | Remote control valves available: Three
Hydraulic Pump
Steering: 3.5 gpm (13.2 L/min) / Implement: 3.5 gpm (13.2 L/min) / 6.3 gpm (24 L/min)
Maximum Pressure
2000 psi (138 bar)
Pump Type
Single gear
Chassis
Hitch/Type
Limited Category 1
Dimensions
Dimensions
Front axle clearance: 7.7 in. (195 mm) | Front tread range: 36.7 in. (931 mm) / Rear tread spacing: 35.2 in. ( 895 mm)
Wheelbase
57.1 in. (1450 mm)
Turning Radius
Without brakes: Outside front tire: 8.2 ft (2.51 m)
Capacities
Hitch Lift Capacity
24-in. behind link arms: 758 lb (344 kg)
Fuel Capacity
6.3 U.S. gal. (24 L)
Axle Capacity, Front
1349 lb (612 kg)
Axle Capacity, Rear
1576 lb (715 kg)
Features
Crankcase with filter: 2.9 qt (2.7 L)
Hydraulic Capacity
Transmission and hydraulic system: 3.2 gal. (12.3 L)
Weights
Weight, As Shipped
Approximate shipping weight (open-station): 1446 lb (656 kg)
Features
Features
Draft control sensing: Select control | Platform - flat/straddle: One-piece semi flat | Gear shift location - console/floor: Left-hand side