2021 John Deere X738 60

MoreLess
Limited Time Offer!

Selling Price -$13,999.00

  • Width:54 in
  • Transmission:Hydro
  • Engine Type:Gas
  • Drive Type:AWD
  • 3 POINT HITCH KIT
  • REAR PTO
  • 2021
  • John Deere
  • X738
  • 60
  • Riding
  • Model: FD750D EFI | Type: Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
  • 25.5 hp 19 kW
  • 45.5 cu in. 745 cc
  • V-twin, cast-iron liners
  • Method: Liquid
  • Dry, replaceable with foam precleaner
  • Gasoline
  • Delivery: Electronic fuel injection
  • Mechanical
  • Type: Hydraulic power
  • Seat: Six-position parallel arm
  • Internal wet disc
  • 18x8.5-10 HDAP
  • 26x12-12 HDAP
  • Steering: 14 in. 35.6 cm
  • 12 V 300 CCA
  • Flywheel alternator, regulated, 20 amp
  • Engine: Solenoid shift
  • Two standard, halogen, 37 W
  • Forward: 0-8.5 mph 0-13.7 km/h | Reverse: 0-6 mph 0-9.7 km/h
  • Mower: Hydraulic clutch, shaft | Shaft or AutoConnect
  • Primer/paint: E-coat/powder
  • Welded heavy-duty
  • Fuel fill opening: On left fender, 3 in. 7.6 cm | Fore-aft adjustment : While seated, slide rail, 14-position, 7 in. 17.8 cm | Uncut circle radius: 28 in. 71.1 cm
  • 25 in. 63.5 cm
  • Back: 21 in. 53.3 cm
  • Mower cut: 1-5.25 in. 2.5-13.3 cm | Cut, increments: 0.25 in. 0.64 cm | 54.5 in. 138 cm
  • Accel Deep™ mower deck: 60 in. 137, 152 cm
  • 75 in. 190.5 cm
  • 55.7 in. 141.5 cm
  • with mower: 74 in. 188 cm | with mower (deflector raised for storage): 62 in. 157.5 cm | without mower: 47 in. 119.4 cm
  • Tank: 5.2 U.S. gal. 19.7 L
  • Bracket: standard front - holds up to four Quik-Tatch weights, 42 lb 19 kg | No fuel or mower: 953 lb 432 kg
  • Fuel tank location: Rear | Taillights or reflector: Taillights | Transaxle Type: K90 hydrostatic integrated with transaxle | Transaxle Control: Twin Touch™ pedals | Front axle: JDM BA8 nodular iron casting | Storage: Covered toolbox | Mower attachability type: Drive-over deck | Front draft arms: Overcenter | Rear draft arms: V-align | Seat Type: Two-piece adjustable seat with brand embroidery
  • Fuel: Gauge on dash
  • Replaceable suction side 10 micron
  • Spindle bushings: Metal, replaceable | Hood material: Noryl GTX902, painted | Floor mats: Sure-grip rubber | Lift system type: Two-function hydraulic
  • Fender: RIM with in-mold paint | Mower: 9 gauge 0.15 in. 3.8 mm
  • Fender: Handles
  • Mower wheel: Spring-loaded pin | Mower level: Exact Adjust ports and onboard deck-leveling gauge
  • 4 year/700 hour bumper-to-bumper (Term limited to years or hours used, whichever comes first, and varies by model.
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $13,999.00
  • Washington
  • Pre-Owned
  • 2400913
  • 2021
  • John Deere
  • X738 60
  • 1M0X738AEMM091239
  • Model: FD750D EFI | Type: Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
  • 25
  • 160
  • Primer/paint: E-coat/powder
  • Gasoline
  • Available
  • with mower: 74 in. 188 cm | with mower (deflector raised for storage): 62 in. 157.5 cm | without mower: 47 in. 119.4 cm
  • Mower cut: 1-5.25 in. 2.5-13.3 cm | Cut, increments: 0.25 in. 0.64 cm | 54.5 in. 138 cm
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.