2019 John Deere X330

MoreLess
Limited Time Offer!

Selling Price -$3,099.00

  • Width:42 in
  • Transmission:Hydro
  • Engine Type:Gas
  • Drive Type:2WD
  • 2019
  • John Deere
  • X330
  • Base
  • Riding
  • Model: 44J6 Cyclonic
  • Overhead valve, full-pressure lube, oil filter
  • 20 hp (14.9 kW)
  • 44.2 cu in. (724 cc)
  • V-twin, cast-iron liners
  • Mechanical
  • Separate levers, automatic choke return
  • Air
  • Dry, replaceable with foam precleaner
  • Transaxle: Internal, not replaceable
  • Gasoline
  • Delivery: Pulse pump, carburetor
  • Gauge on dash
  • Manual, sector and pinion
  • Mower: Electric power take-off (PTO) clutch, in-line belt
  • Fuel tank location: Rear | Hourmeter | Cruise Control: button on dash | Oil cooler: Fins and fan on transaxle | Primer/paint: E-coat/powder | Weight bracket: Standard rear | Floor mats: Sure-grip rubber | Storage: On fender and under seat | Service interval decal | Cup holder | Preset cut height | Mower deck type: Side discharge | Mower wash port | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
  • Internal wet disc
  • Cast iron front axle, front wheel ball bearings
  • 15x6-6
  • 20x10-8
  • Mower: Two | Mower, adjustment: Four-position, tool required
  • 12 V (340 CCA)
  • Flywheel alternator, regulated, 14 amp
  • Engine: Bendix
  • Transaxle Forward speed: 0-5.5 mph (0-8.9 km/h) | Transaxle Reverse speed: 0-4 mph (0-6.4 km/h)
  • Equipment mounting: Yes, heavy duty | Mower attachability: Slide under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Two pins and spring clips
  • Welded heavy-duty
  • Fuel fill opening, On left fender: 3 in. (7.6 cm) | Steering, Uncut circle radius: 26 in. (66 cm)
  • 72 in. (182.9 cm)
  • 47 in. (120 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
  • With mower: 50.5 in. (128 cm) | With mower (deflector raised for storage): 50.5 in. (128 cm) | Without mower: 38 in. (96.5 cm)
  • 49.4 in. (125.5 cm)
  • 42 in. (107 cm)
  • Steering: 16 in. (40.6 cm)
  • Back: 15 in. (38.1 cm)
  • Fore-aft adjustment (While seated, slide rail, 14-position): 7 in. (17.8 cm)
  • Large: 14 in. (35.6 cm)
  • Tank: 3.3 U.S. gal. (12.5 L)
  • Mower, no fuel: 542 lb (246 kg)
  • Two standard, incandescent, 27 W
  • Meets ANSI standard | Meets OPEI standard | Safety video
  • Open-back design with grasp | Suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
  • Type: Foot pedal with optional adjustable spring assist kit
  • Hood: Molded-in color hood material reduces sound, will not rust or dent
  • Fender: Stamped steel | Mower: Stamped steel deck shell, 12 gauge 0.105 in. (2.7 mm)
  • 13 positions
  • U.S.: 4 year/300 hour bumper-to-bumper
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $3,099.00
  • Uniontown
  • Pre-Owned
  • 2302233
  • 2019
  • John Deere
  • X330
  • 1M0X3300AKKM073883
  • Model: 44J6 Cyclonic
  • 21
  • 193
  • Equipment mounting: Yes, heavy duty | Mower attachability: Slide under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Two pins and spring clips
  • Gasoline
  • Available
  • With mower: 50.5 in. (128 cm) | With mower (deflector raised for storage): 50.5 in. (128 cm) | Without mower: 38 in. (96.5 cm)
  • 47 in. (120 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.