Selling Price -
$2,969.00
- Width:42 in
- Transmission:Hydro
- Engine Type:Gas
- Drive Type:2WD
- 2019
- John Deere
- X330
- Base
- Riding
- Model: 44J6 Cyclonic
- Overhead valve, full-pressure lube, oil filter
- 20 hp (14.9 kW)
- 44.2 cu in. (724 cc)
- V-twin, cast-iron liners
- Mechanical
- Separate levers, automatic choke return
- Air
- Dry, replaceable with foam precleaner
- Transaxle: Internal, not replaceable
- Gasoline
- Delivery: Pulse pump, carburetor
- Gauge on dash
- Manual, sector and pinion
- Mower: Electric power take-off (PTO) clutch, in-line belt
- Fuel tank location: Rear | Hourmeter | Cruise Control: button on dash | Oil cooler: Fins and fan on transaxle | Primer/paint: E-coat/powder | Weight bracket: Standard rear | Floor mats: Sure-grip rubber | Storage: On fender and under seat | Service interval decal | Cup holder | Preset cut height | Mower deck type: Side discharge | Mower wash port | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
- Internal wet disc
- Cast iron front axle, front wheel ball bearings
- 15x6-6
- 20x10-8
- Mower: Two | Mower, adjustment: Four-position, tool required
- 12 V (340 CCA)
- Flywheel alternator, regulated, 14 amp
- Engine: Bendix
- Transaxle Forward speed: 0-5.5 mph (0-8.9 km/h) | Transaxle Reverse speed: 0-4 mph (0-6.4 km/h)
- Equipment mounting: Yes, heavy duty | Mower attachability: Slide under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Two pins and spring clips
- Welded heavy-duty
- Fuel fill opening, On left fender: 3 in. (7.6 cm) | Steering, Uncut circle radius: 26 in. (66 cm)
- 72 in. (182.9 cm)
- 47 in. (120 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
- With mower: 50.5 in. (128 cm) | With mower (deflector raised for storage): 50.5 in. (128 cm) | Without mower: 38 in. (96.5 cm)
- 49.4 in. (125.5 cm)
- 42 in. (107 cm)
- Steering: 16 in. (40.6 cm)
- Back: 15 in. (38.1 cm)
- Fore-aft adjustment (While seated, slide rail, 14-position): 7 in. (17.8 cm)
- Large: 14 in. (35.6 cm)
- Tank: 3.3 U.S. gal. (12.5 L)
- Mower, no fuel: 542 lb (246 kg)
- Two standard, incandescent, 27 W
- Meets ANSI standard | Meets OPEI standard | Safety video
- Open-back design with grasp | Suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
- Type: Foot pedal with optional adjustable spring assist kit
- Hood: Molded-in color hood material reduces sound, will not rust or dent
- Fender: Stamped steel | Mower: Stamped steel deck shell, 12 gauge 0.105 in. (2.7 mm)
- 13 positions
- U.S.: 4 year/300 hour bumper-to-bumper
- $2,969.00
- Uniontown
- Pre-Owned
- 2302233
- 2019
- John Deere
- X330
- 1M0X3300AKKM073883
- Model: 44J6 Cyclonic
- 21
- 193
- Equipment mounting: Yes, heavy duty | Mower attachability: Slide under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Two pins and spring clips
- Gasoline
- Available
- With mower: 50.5 in. (128 cm) | With mower (deflector raised for storage): 50.5 in. (128 cm) | Without mower: 38 in. (96.5 cm)
- 47 in. (120 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)