Equipment mounting: Yes, heavy duty | Mower attachability: Slide under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Two pins and spring clips
Gasoline
Available
With mower: 50.5 in. (128 cm) | With mower (deflector raised for storage): 50.5 in. (128 cm) | Without mower: 38 in. (96.5 cm)
47 in. (120 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
Specifications
2019
John Deere
X330
Base
Riding
Model: 44J6 Cyclonic
Overhead valve, full-pressure lube, oil filter
20 hp (14.9 kW)
44.2 cu in. (724 cc)
V-twin, cast-iron liners
Mechanical
Separate levers, automatic choke return
Air
Dry, replaceable with foam precleaner
Transaxle: Internal, not replaceable
Gasoline
Delivery: Pulse pump, carburetor
Gauge on dash
Manual, sector and pinion
Mower: Electric power take-off (PTO) clutch, in-line belt
Fuel tank location: Rear | Hourmeter | Cruise Control: button on dash | Oil cooler: Fins and fan on transaxle | Primer/paint: E-coat/powder | Weight bracket: Standard rear | Floor mats: Sure-grip rubber | Storage: On fender and under seat | Service interval decal | Cup holder | Preset cut height | Mower deck type: Side discharge | Mower wash port | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
Internal wet disc
Cast iron front axle, front wheel ball bearings
15x6-6
20x10-8
Mower: Two | Mower, adjustment: Four-position, tool required
Equipment mounting: Yes, heavy duty | Mower attachability: Slide under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Two pins and spring clips
Welded heavy-duty
Fuel fill opening, On left fender: 3 in. (7.6 cm) | Steering, Uncut circle radius: 26 in. (66 cm)
72 in. (182.9 cm)
47 in. (120 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
With mower: 50.5 in. (128 cm) | With mower (deflector raised for storage): 50.5 in. (128 cm) | Without mower: 38 in. (96.5 cm)